Implementation of Safety Risk Management in Aircraft Airffame Maintenance

Authors

  • Untung Wibowo Akademi Penerbang Indonesia Banyuwangi
  • Iwan Engkus Kurniawan Politeknik Penerbangan Indonesia Curug
  • Hadi Prayitno Akademi Penerbang Indonesia Banyuwangi

DOI:

https://doi.org/10.61194/sijl.v1i2.66

Keywords:

Airframe Maintenance, Hazard Identification, Safety Risk Management

Abstract

This study analyzes the application of Safety Risk Management in the practice of aircraft maintenance at AMTO (Aircraft Maintenance Training Organization) Indonesia Aviation Polytechnic Curug. The research method used is descriptive qualitative. Starting with hazard identification, risk assessment, and continuing with mitigation actions. Risk assessment uses the Risk Matrix. The results showed that 9 hazards were at tolerable levels, namely 4 hazards in the component release phase, 3 hazards in the inspection phase, and 2 hazards in the installation and adjustment phase. Recommended mitigation measures include additional training, safety briefing, safety promotion, supervision of important phases, and periodic checks on tools and equipment. This research is then used as a document for compliance with Safety Risk Management according to the SMS Implementation Plan at the AMTO (Aircraft Maintenance Training Organization) of the Indonesian Aviation Polytechnic Curug.

References

AMTO 147D-03. (2021). Safety Management System Manual. In AMTO 147 (Vol. 1, Issue 00). https://doi.org/10.2118/25553-ms

Astrada, P. E., & Tejamaya, M. (2021). PENILAIAN RISIKO KESEHATAN DARI BAHAN KIMIA PADA PEKERJA BAGIAN PRODUKSI PERISA MAKANAN DI PT. X JAKARTA TIMUR TAHUN 2020. Journal of Industrial Hygiene and Occupational Health, 5(2), 47–60.

FAA. (2018). Aviation Maintenance Technician Handbook - Volume 1. Aviation Maintenance Technician Handbook - Airframe, 1, 588.

Falahudin, D., Kurniawanto, H., & Kurniawan. Iwan Engkus. (2022). Analisis Penerapan HIRAM ( Hazard Identification Risk Assessment and Mitigation ) di PT. Mulya Sejahtera Technology Analysis Implementation of HIRAM ( Hazard Identification Risk Assessment and Mitigation ) At PT . Mulya Sejahtera Technology. Airman Jurnal Teknik Dan Keselamatan Penerbangan, 5.

Fashli, R. A., & Ginusti, G. N. (2022). ANALISIS SISTEM MANAJEMEN KESELAMATAN PETUGAS DALAM MENANGANI BAHAYA HEWAN LIAR DI AREA AIRSIDE. 7(1), 1–11.

Fergusan, F., Prasetya, T. A. E., & Nawainetu, E. D. (2020). Risk Assessment Kebakaran Dan Peledakan Di Pt. Xyz Surabaya. Journal of Industrial Hygiene and Occupational Health, 4(2), 42–53. https://doi.org/10.21111/jihoh.v4i2.2674

ICAO. (2016). ICAO Annex 19 – Safety Management (Issue July). http://www.icao.int/secretariat/PostalHistory/annex_19_safety_management.htm

ICAO 9859, I. (2018). Doc 9859, Safety Management Manual (SMM). In Doc 9859 AN/474.

Indonesia, D. (2017). ADVISORY CIRCULAR AC 147-02. October.

Mei, Q. (2020). Effects of organizational safety on employees’ proactivity safety behaviors and occupational health and safety management systems in Chinese high-risk small-scale enterprises. International Journal of Occupational Safety and Ergonomics, 26(1), 101–111. https://doi.org/10.1080/10803548.2018.1470287

Nugroho, A. (2021). Identifikasi Potensi Bahaya di Ruang Tunggu Penumpang Bus Trans Kota Batam Identification of Potential Hazard in Trans Batam Passenger CI Room. 08(01), 31–50.

Priyangga, A. R., Mursyidin, & Kurniawan, I. E. (2020). Penerapan Safety Risk Management Pada Rotary Wing Hangar, Engineering dan Engine Propeller Workshop di Unit Perawatan Pesawat Udara Sekolah Tinggi Penerbangan Indonesia. Jurnal Ilmiah Aviasi Langit Biru, 13, 282.

Rivaldi, M., Wijaya, R., Kurniawan, I. E., Herwanto, D., Retno, T., Sari, P., & Indonesia, P. P. (2022). Pengaruh lingkungan kerja terhadap safety risk manajemen pada teknisi pesawat. 15(01), 38–47.

Santos, L. F. F. M., & Melicio, R. (2019). Stress, pressure and fatigue on aircraft maintenance personal. International Review of Aerospace Engineering, 12(1), 35–45. https://doi.org/10.15866/irease.v12i1.14860

Saputra, V. E., Kurniawan, I. E., & Sunardi, D. (2022). ANALISIS PENERAPAN MANAJEMEN RESIKO KESELAMATAN PADA PROSES PENGGANTIAN ENGINE BOEING 737 - 300 DI PT . MULYA SEJAHTERA TECHNOLOGY. Jurnal Penelitian Politeknik Penerbangan Surabaya, 7(2), 46–57.

United States. Flight Standards Service. (2018). Aviation Maintenance Technician Handbook - General. 1.

Vasconcelos, V. de. (2018). Integrated engineering approach to safety, reliability, risk management and human factors. In Springer Series in Reliability Engineering (Issue 2147483647, pp. 77–107). https://doi.org/10.1007/978-3-319-62319-1_4

Wicaksono, R. W., Mursyidin, & Kurniawan, I. E. (2020). ANALISIS RANCANGAN WORKSHOP SHEET METAL UNTUK MENINGKATKAN KESELAMATAN DAN EFISIENSI KERJA DI PT. MERPATI MAINTENANCE FACILITY SURABAYA. 13(3), 58–68.

Xie, X. (2018). Human factors risk assessment and management: Process safety in engineering. Process Safety and Environmental Protection, 113, 467–482. https://doi.org/10.1016/j.psep.2017.11.018

Yakub, M., & Phuspa, S. M. (2019). Manajemen Risiko Kebakaran pada PT Pertamina EP Asset 4 Field Sukowati. Journal of Industrial Hygiene and Occupational Health, 3(2), 174–185.

Zhou, L. J. (2018). Research on occupational safety, health management and risk control technology in coal mines. International Journal of Environmental Research and Public Health, 15(5). https://doi.org/10.3390/ijerph15050868

Brickel, N., DeRossett, S., Buraglio, M., Evans, C., & Jones, S. (2013). Investigation of the impact of urine handling procedures on interpretation of urinalysis findings and product safety in subjects treated with ezogabine. Therapeutics and Clinical Risk Management, 9(1), 207–213. https://doi.org/10.2147/TCRM.S42536

Chen, T.-C., Zahar, M., Voronkova, O. Y., Khoruzhy, V. I., Morozov, I. V, & Esfahani, M. J. (2022). Providing a framework based on decision-making methods to assess safety risk in construction projects. International Journal of Industrial Engineering and Management, 13(1), 8–17. https://doi.org/10.24867/IJIEM-2022-1-297

Gstaettner, A. M., Rodger, K., & Lee, D. (2022). Managing the safety of nature? Park visitor perceptions on risk and risk management. Journal of Ecotourism, 21(3), 246–265. https://doi.org/10.1080/14724049.2021.1937189

Porsanger, L., & Magnussen, L. I. (2021). Risk and Safety Management in Physical Education: A Study of Teachers’ Practice Perspectives. Frontiers in Sports and Active Living, 3. https://doi.org/10.3389/fspor.2021.663676

Xiahou, X., Li, K., Li, F., Zhang, Z., Li, Q., & Gao, Y. (2022). AUTOMATIC IDENTIFICATION AND QUANTIFICATION OF SAFETY RISKS EMBEDDED IN DESIGN STAGE: A BIM-ENHANCED APPROACH. Journal of Civil Engineering and Management, 28(4), 278–291. https://doi.org/10.3846/jcem.2022.16560

Zhang, Z., Li, W., & Yang, J. (2021). Analysis of stochastic process to model safety risk in construction industry. Journal of Civil Engineering and Management, 27(2), 87–99. https://doi.org/10.3846/jcem.2021.14108

Downloads

Published

2023-08-30

How to Cite

Wibowo, U., Engkus Kurniawan, I., & Prayitno, H. (2023). Implementation of Safety Risk Management in Aircraft Airffame Maintenance. Sinergi International Journal of Logistics, 1(2), 85–95. https://doi.org/10.61194/sijl.v1i2.66

Issue

Vol. 1 No. 2 (2023): August

Section

Articles

License

Copyright (c) 2023 Untung Wibowo, Iwan Engkus Kurniawan, Hadi Prayitno

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.